Add coating RS-1K bitumen emulsion

Finish fur RS-1K cationic bitumen emulsion is definitely an emulsified asphalt comprising 50% bitumen. It is just a method viscosity emulsion used mainly for covering with standard overlay and patching operate.

Finish Fur RS-1K cationic bitumen emulsion is done according to Malaysian Common Milliseconds 1.61 (1994).

SPECS

Property	Min	Max	Test Method
Saybolt furol viscosity @ 25° C (sec)	20	50	ASTM D244
Storage Stability (24 hours) (%)	-	1	ASTM D244
Sieve Test (%)	-	0.1	ASTM D244
Particle Charge Test	-	Positive	ASTM D244
Residue from Distillation (%)	-	50	ASTM D244
Test On Residue from Distillation Penetration on residue @  25° C , 100g , 5 sec (0.1mm)	60	200	ASTM D5
Solubility in Trichloroethylene (% Mass) 97.5	-	-	ASTM D2042

APPLICATION

Finish Coating RS-1K cationic bitumen emulsion can be utilized at normal heat range for the spray rate associated with 0. 25 for you to 0.70 litre for each square meter (0. 05 to be able to 0.15 gallon each sq yard).

PRESENTATION

Tack Fur RS-1K cationic bitumen emulsion is usually stuffed in typical forty five gallon refurbished aluminum drum with two hundred litres for each drum.

-Source: Tack coat RS-1K

-Read More: The Best Bitumen Emulsion