The Cutback Bitumen MC 30

The cutback bitumen is homogeneous and will not memory foam (as seen visually) when heated up for you to request heat range. Different marks involving cutback bitumen (medium recovering type) in accordance with prerequisites given underneath:

MICROSOFT 159: 1994
Specs intended for cutback Bitumen for use in the Design And/or maintenance regarding Pavement
(First Revision).

PREREQUISITES FOR CUTBACK BITUMEN (MEDIUM-CURING TYPE) REGARDING USE WITHIN TARMAC BUILDING AS WELL AS SERVICING

Properties	Min	Max	Test Method
Kinemalic 1 viscosity at 60°C, eSt	30	60	ASTM D2170
Flash Point (Tag Open-Cup),°C	38	-	ASTM D1310
Distillate test 2 :
Distillate, percent by Volume of total 360°C
To 190°C	-	15	ASTM D402
To 225°C	20	60	ASTM D402
To 260°C	50	90	ASTM D402
To 316°C	80	90	ASTM D402
Residue from distillation to 360°C,  percent volume by different
Test on residue from distillation Penetration at   25°C,100g, 5 sec.	50	-
Ductility 3 at 25°C, cm	120	250	ASTM D402 / ASTM D113
Solubility in trichloroethylene, percent mass	100	-	ASTM D402 / ASTM D2024
Water, percent volume	-	0.2	ASTM D95

MAKES USE OF

Priming off non-bituminous path vehicles, provision regarding momentary surfaces (deviations).

APPLICATION RATE

From 0.6 litre for every m² to 1.2 litre per m²

SPRAYING/ALICATION TEMPERATURES

60-80˚ C

TRANSFORMATION

At Application Temperature	Drums@20˚C
Kg to Litre : Divide by 0.0907	Kg to Litre 0.940
Litre to Kg : Multiply by 0.0907	Litre to Kg 0.940

CLEANSING INVOLVING PALMS & INSTRUMENTS

Make use of paraffin.

-Source: Cutback Bitumen MC 30

-See more: Best Bitumen Emulsion

-Home Page: Asphalt Manufacturers

Top rated cationic emulsion

Neomed top rated cationic emulsion of elastomer changed bitumen made up of 60% bitumen. This can be a method viscosity emulsion applied largely regarding shell throughout regular overlay and patching perform.

Neomed high performance cationic emulsion regarding elastomer improved bitumen is manufactured in line with Malaysian Regular Master of science 1.61 (1994).

SPECIFICATION

Property	Min	Max	Test Method
Saybolt furol viscosity @ 25° C (sec)	-	70	ASTM D244
Storage Stability (24 hours) (%)	-	1	ASTM D244
Sieve Test (%)	-	0.10	ASTM D244
Particle Charge Test	-	Positive	ASTM D244
Residue from Distillation (%)	60	-	ASTM D244
Test On Residue from Distillation Penetration on residue @  25 , 100g , 5 sec (0.1mm)	60	200	ASTM D5
Solubility in Trichloroethylene (% Mass) 97	97.5	-	ASTM D2042
Softening point °C	41	51

SOFTWARE

Neomed powerful cationic emulsion involving elastomer improved bitumen can be employed on normal heat range on the squirt charge associated with 0.25 in order to 0.70 litre for each block meter (0.05 to help 0.15 gallon every square yard).

PACKAGING

Neomed high end cationic emulsion connected with elastomer modified bitumen is loaded inside normal forty five gallon refurbished metal drum on two hundred litres per drum.

-Source: Neomed Emulsion

-See more: Bitumen Emulsion

-Home Page: Best Asphalt